Headrest installation help

Printed From: the12volt.com
Forum Name: Mobile Video, GPS, and Navigation
Forum Discription: Mobile Video Head Units, DVD Players, LCD and TFT Monitors, Navigation, GPS, PS2, PS3, XBox, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=33577
Printed Date: May 05, 2024 at 11:25 PM

Topic: Headrest installation help

Posted By: Phenz
Subject: Headrest installation help
Date Posted: June 09, 2004 at 4:00 PM

Is it possible to install a monitor (specifically Pioneer AVD-W6200) into the headrest? I know this model comes with a quick-install kit, which clamps on the headrest poles for easy installation, but I wish to install it into the actual headrest, and cannot find a mounting shroud for this specific monitor.

However, I have seen a custom job on a webiste, which allows me to beleive that it can be done. Can anyone please offer any advice on installing this monitor into my headrests. Besides cutting a hole to insert the monitor, how could I install it and get a secure & clean look?

Replies:

Posted By: Teamrf
Date Posted: June 09, 2004 at 6:19 PM

It can be done without a doubt. You may want to build a headrest bracket for it unless you are really good with fabrication. If you are then you can do this without the bracket. I reccommend building a bracket though it would give the install more support.

-------------
~The Rookie~
Rookie of the year that is...
Don't let the smoke out of your equiptment..it doesn't go back in.

Posted By: Phenz
Date Posted: June 09, 2004 at 8:45 PM

Thanks Teamrf. Unfortunatey, I am not sure how tp proceed with building a headrest bracket? Do you have any tips/suggestions? What should I use?