suburban headrest

Printed From: the12volt.com
Forum Name: Mobile Video, GPS, and Navigation
Forum Discription: Mobile Video Head Units, DVD Players, LCD and TFT Monitors, Navigation, GPS, PS2, PS3, XBox, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=35490
Printed Date: May 09, 2025 at 6:49 AM

Topic: suburban headrest

Posted By: mj239air
Subject: suburban headrest
Date Posted: July 12, 2004 at 10:23 PM

My question is regarding my 2000 suburban and the front headrests. I took out the passenger one so that I could begin the installation of my monitors and was confused when I started messing with it. Every tutorial that I have read always shows the headrests as having an interior of soft foam. Well the problem I ran into is that my headrests have a plastic piece in them. The headrest has 3 positions it can lock into and I am afraid this will not give me enough room for my monitors. I am installing the Alpine 7" wide monitors in the front 2. I don't want to cut anything until I find out if it is possible. Anyone with info or experience with these would be greatly appreciated.

Replies:

Posted By: securinu
Date Posted: July 15, 2004 at 10:37 PM

I have a set for sale over on ebay that are ready for monitors you might need to change the color of the leather but there setup for flushmount monitors already

https://cgi.ebay.com/dll?ViewItem&rd=1&item=5709550412&ssPageName=STRK:MESE:IT

-------------
Joe O'Byrne
Owner / Installer

Posted By: actionjackson
Date Posted: July 15, 2004 at 10:47 PM

I did a sub. the other day, you will have no promblems sinking those headrests, you'll just have to drill a hole through the plastic to run the wires down