Kenwood DDX7015 No Sound

Printed From: the12volt.com
Forum Name: Mobile Video, GPS, and Navigation
Forum Discription: Mobile Video Head Units, DVD Players, LCD and TFT Monitors, Navigation, GPS, PS2, PS3, XBox, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=35859
Printed Date: May 14, 2025 at 1:32 AM

Topic: Kenwood DDX7015 No Sound

Posted By: Rays98
Subject: Kenwood DDX7015 No Sound
Date Posted: July 19, 2004 at 8:25 PM

I installed a Kenwood DDX 7015 with the factory harness and used factory amp for sound. I had sound for the tuner, DVD, and CD. I also had a picture on the DVD, everything was fine. I recently installed two amps, one for the subs and one for everything else. I still am using the factory harness, put am now using the RCAs out of the Kenwood for the amps. I get sound out of the tuner. I get a DVD picture. But I do not get any sound out of CD's or when I play a DVD. Is there something I messed up in the setup menus???? HELP!! I AM FRUSTRATED!!

Ray

Replies:

Posted By: lspker
Date Posted: July 19, 2004 at 8:32 PM

Twothinks come to mind, first you used the power ant wire (blue) to turn on the amp instead of the remote (blue/white). Or you might need to turn on the amp useing crossover settings.

Posted By: Rays98
Date Posted: July 20, 2004 at 10:05 AM

Your a genious!!! That was it. I had the Main amp hooked up to the Blue/Black and the Sub amp hooked up to the Blue/White. I cannot believe that such a complicated install I missed something so simple. Thank s so very much for your help.

Ray