hooking up the audiovox dvd to radio

Printed From: the12volt.com
Forum Name: Mobile Video, GPS, and Navigation
Forum Discription: Mobile Video Head Units, DVD Players, LCD and TFT Monitors, Navigation, GPS, PS2, PS3, XBox, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=36412
Printed Date: July 06, 2025 at 5:23 AM

Topic: hooking up the audiovox dvd to radio

Posted By: dave25456
Subject: hooking up the audiovox dvd to radio
Date Posted: July 29, 2004 at 3:58 PM

I am trying to hook up the audiovox dvd player to the radio for it can run on all the speakers .which way should I do it and what wires do I require.thanx for the help

-------------
dave25456

Replies:

Posted By: Jay T
Date Posted: July 29, 2004 at 5:07 PM

if you have a disk changer input then you can get an adaptor and plug your RCA's into the adaptor then into the changer input. If not then you need an FM modulator that you plug the RCA's into. It then sends a signal to the head unit and you pick it up on a a specific frequency IE 88.3 FM

Posted By: dave25456
Date Posted: July 31, 2004 at 7:50 AM

so you need a fm modulator and then run that to the radio?what station do I put the radio at or would it pick it up right away?

-------------
dave25456

Posted By: Velocity Motors
Date Posted: July 31, 2004 at 9:07 AM

The FM mod will have different stations to choose from on a switch ( usually only two to choose from ). All you need to do is pick the station and have it set to that station on the radio.

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA

Posted By: Nocturnal
Date Posted: August 02, 2004 at 7:34 AM

There are two types of FM modulators. Wired and wireless of course. The wired version will have a wire that resembles the wire from your car antenna. That one goes into your head unit and the car antenna wire goes into the FM mod. The wireless one of course elminates the wires and uses RF that you just tune your radio to.

Print Page | Close Window