TV Tuner in 2004 Town and Country Minivan
Printed From: the12volt.com
Forum Name: Mobile Video, GPS, and Navigation
Forum Discription: Mobile Video Head Units, DVD Players, LCD and TFT Monitors, Navigation, GPS, PS2, PS3, XBox, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=37311
Printed Date: May 12, 2025 at 9:25 PM
Topic: TV Tuner in 2004 Town and Country Minivan
Posted By: pmachado
Subject: TV Tuner in 2004 Town and Country Minivan
Date Posted: August 13, 2004 at 8:02 AM
Hello, I'm just wondering whether anybody in the forums here has ever put a tv tuner into their Town and Country minivan. I've just purchased a Power Acoustik Tuner-5R TV tuner and I'm looking for a good place to mount it. As well I've noticed that the rear of the DVD 6-Disc player unit has no aux inputs or outputs. I was hoping to use any RCA outputs to run into the tuner box and then out to the monitor. However there are no RCA's back there. Does anybody know of any wiring harness available to provide that ability? Any help would be very much appreciated. Thank you very much.
Replies:
Posted By: switch_hitter
Date Posted: August 13, 2004 at 9:02 PM
Is it a factory DVD player?
Posted By: pmachado
Date Posted: August 13, 2004 at 9:05 PM
Yes it is a factory DVD player. Thanks.
Posted By: switch_hitter
Date Posted: August 13, 2004 at 9:19 PM
you wont be able to add the factory dvd player to the tuner
Posted By: pmachado
Date Posted: August 14, 2004 at 7:57 PM
I should be able to use it through the front A/V inputs though right? If I run a set A/V cables from the tuner output to the DVD Player input it should work that way right? Thanks.
Posted By: switch_hitter
Date Posted: August 14, 2004 at 8:22 PM
Didnt you say that your DVD player didnt have any inputs?
Posted By: pmachado
Date Posted: August 18, 2004 at 10:37 PM
I apologize....what I meant by no inputs was in the back of the unit. The only AV inputs I have are on the front unit. I would have preferred to have everything hooked up inside the dash nice and neat rather than having wires stick out the front of the unit. But it looks like I might be stuck doing it that way. THanks for the replies.
|