Phoenix Digital 7.2 Widescreen

Printed From: the12volt.com
Forum Name: Mobile Video, GPS, and Navigation
Forum Discription: Mobile Video Head Units, DVD Players, LCD and TFT Monitors, Navigation, GPS, PS2, PS3, XBox, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=38346
Printed Date: July 22, 2025 at 6:07 PM

Topic: Phoenix Digital 7.2 Widescreen

Posted By: bartdemuynck
Subject: Phoenix Digital 7.2 Widescreen
Date Posted: August 30, 2004 at 3:08 PM

I just bought this 7.2" widescreen monitor for the car. I installed it on the headrest and wired the cables to the DVD player. WHat do I do with the 12V wiring for the monitor. Do I somehow connect this to the DVD player (it does have a 12V output) or do I connect this elsewhere. Could someone tell me step by step how to give the monitor power?

Thanks.

Replies:

Posted By: switch_hitter
Date Posted: September 01, 2004 at 9:58 PM

i normally run a 14 guage wire fused from the battery when i do 1 tv, and dvd player setups, and make sure each on the components is fused also..and run it to a switch ,or a relay off the ignition

-------------
2 Memphis HPO 12s
1 Memphis 1000D
2 Memphis 8s
1 Memphis MC200
4 Memphis 3way 6 1/2s
1 Memphis MC3004
4 Memphis Tweeters
1 Memphis 3-way electronic crossover
2 Memphis 5 1/4
2 Memphis 4s

Print Page | Close Window