WANT TO TAKE LCD OUT OF CVA 1003
Printed From: the12volt.com
Forum Name: Mobile Video, GPS, and Navigation
Forum Discription: Mobile Video Head Units, DVD Players, LCD and TFT Monitors, Navigation, GPS, PS2, PS3, XBox, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=40740
Printed Date: July 07, 2025 at 11:29 AM
Topic: WANT TO TAKE LCD OUT OF CVA 1003
Posted By: mrsparkle
Subject: WANT TO TAKE LCD OUT OF CVA 1003
Date Posted: October 12, 2004 at 1:31 PM
Hi, I was wondering if anyone could help me by letting me know how to take out the CVA 1003 LCD screen? The unit is damaged, fortunatelly the screen still works. Is there a way to take the lcd out and use it as a standalone unit. How would I go upon wiring this thing up, by the looks of it, the lcd is powered by a ribbon type of cable. All I want to do is splice an rca/power/grown wire to the LCD and make it work as a standalone. thanks,
Replies:
Posted By: rage237
Date Posted: October 13, 2004 at 1:03 PM
more than likely the ribbon cable is the cable from the LCD to the LCD controller IOW you cant use it as a stand alone LCD you would be best getting the whole unit working thats my .02 but i dont know the situation with the deck or why it does not work but the LCD still does??
Posted By: mrsparkle
Date Posted: October 14, 2004 at 2:05 PM
The deck shows a display, its just when you connect a vid source or sound source you get this feedback type of humming sound,,, and no picture (or a snow effect on the screen)
Posted By: SoundFX411
Date Posted: October 14, 2004 at 2:48 PM
I had somewhat the same problem with a cva-1003 and I called ALPINE and sent it to them. For $90.00 they fixed the unit as if it were new and gave me a 90 day warrenty. That's an option
Posted By: the1alchemist
Date Posted: October 17, 2004 at 5:59 PM
i would bet its rgb...at least the factory ones i modify for video display are..i would think internally they do the same thing..converters.tv has the same thing pac sells for 200 bucks.. i think its pac.. anyway,the raw board is only 125,thats probably all you need to make it work..i would need to look a schematic tobe sure,usually you can just look at the circuit board,alpines are usually pretty well labeled..
-------------
'Stereo' Mike
The Audio CARtist,LLC
9600 Balt. Ave.
College Park,MD 20740
301-474-6260
|