Print Page | Close Window

Remote Mount of LCD from cva-1003?

Printed From: the12volt.com
Forum Name: Mobile Video, GPS, and Navigation
Forum Discription: Mobile Video Head Units, DVD Players, LCD and TFT Monitors, Navigation, GPS, PS2, PS3, XBox, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=4269
Printed Date: July 24, 2025 at 10:30 PM


Topic: Remote Mount of LCD from cva-1003?

Posted By: ZTREK
Subject: Remote Mount of LCD from cva-1003?
Date Posted: October 07, 2002 at 8:24 PM

Has any removed the lcd from any alpine,pio,sony,etc.

I am going to try, and I would like to hear stories from any one else.

Reason, I need all the audio and video functions on one LCD display without the unit in the dash.

Thanks, Jason



-------------
Jason Blalock
Director of Technical Services
Superior Automotive Company



Replies:

Posted By: djfearny2
Date Posted: October 07, 2002 at 8:55 PM
yes i built a custom dash to go around it but not that version of alpine the step up from that with the cd player in it and it was easy and looked and worked good.

-------------
Jon
Installer/Help Technician
---coral springs florida---
mecp certification is not always needed. I have it and it has not helped me out at all. my experience out shines it.




Posted By: ZTREK
Date Posted: October 08, 2002 at 7:38 AM

What was the model number of the one you used?

How far away was the reciever from the LCD?

Did u replace or extend the ribbon cable?

thanks, Jason



-------------
Jason Blalock
Director of Technical Services
Superior Automotive Company




Posted By: Velocity Motors
Date Posted: October 08, 2002 at 12:30 PM

Question ?? Why would you spend the extra $$$ on the flip up monitors if your going to mount the CPU away from the flip up LCD ? Why not get a normal indash DVD and an separate screen ? A lot less work and in the long run alot less installation costs for the customer.



-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA




Posted By: ZTREK
Date Posted: October 08, 2002 at 3:54 PM

I intend to use the audio functions as my main head unit, and 1 A/V input

CD Changer controls, AM/FM,XM, And AV

Im leaving the factory unit in the car because of looks and phone intergration, and intend to flush mount the LCD on the Dash or in the headliner. Then with the pref adpt, use controls in wheel to control head unit (minus the unit). I will mount the stripped head unit under the seat or wherever the extended ribbon cable will allow

Thanks, for your Help

Jason



-------------
Jason Blalock
Director of Technical Services
Superior Automotive Company




Posted By: AaronD81
Date Posted: October 17, 2002 at 9:44 PM
I'm not sure if I understnad your idea, but some newer Alpine models come with a video out plug.  This allows you to hook up another tv to see what is shown on the flip out screen, follow?  This would allow you to remote mount the head unit without ruining it.  Getting the remote to work with it would be a problem.  Does that help at all?




Posted By: ZTREK
Date Posted: December 15, 2002 at 4:59 PM

Yes that helps, I will need to determin which alp units have the video out.

Thanks



-------------
Jason Blalock
Director of Technical Services
Superior Automotive Company





Print Page | Close Window