AVIC-N1 use or bypass stock AMP in G35
Printed From: the12volt.com
Forum Name: Mobile Video, GPS, and Navigation
Forum Discription: Mobile Video Head Units, DVD Players, LCD and TFT Monitors, Navigation, GPS, PS2, PS3, XBox, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=43951
Printed Date: May 19, 2024 at 6:35 AM
Topic: AVIC-N1 use or bypass stock AMP in G35
Posted By: newbie35
Subject: AVIC-N1 use or bypass stock AMP in G35
Date Posted: November 28, 2004 at 9:53 AM
I recently purchased the AVIC-N1 and will be having an audio place install in my Infiniti G35. The Bose system utilizes an AMP. However, one audio place says I need a hi/lo converter, one says that I can bypass the stock amp, the other says I need to purchase a 4 channel amp. Why the variances in recommendations?
Ideally, I want to keep my stock speakers and amp just because I really dont need the *best* sound. Besides, purchasing a new amp and speakers is still expensive. I have tried doing searches but found no answers as most people have replaced their speakers and amps at the same time as the HU. I read in one thread that there may be a power on lead on the amp that I need to tap into.
I appreciate the help!
Replies:
Posted By: jeremyjerm
Date Posted: November 28, 2004 at 10:13 AM
i would bypass it man.
but it all depends on whether you want to use the bose speakers. have the audio shop check if there 4 or 2 ohm. if there 2 ohm woofers with an additional tweeter i would replace them. you can just use the avic's internal amp or if you really want to rock buy a 4 channel amp.
get ready to spend some labor dollas!
Posted By: jeremyjerm
Date Posted: November 28, 2004 at 10:16 AM
oh yea and if you wanted to use the bose amp you would have to buy a bose adaptor a 50 to 100 dollar part
|