cva 1005 in automatic 95 4 door blazer
Printed From: the12volt.com
Forum Name: Mobile Video, GPS, and Navigation
Forum Discription: Mobile Video Head Units, DVD Players, LCD and TFT Monitors, Navigation, GPS, PS2, PS3, XBox, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=4468
Printed Date: June 09, 2024 at 1:11 AM
Topic: cva 1005 in automatic 95 4 door blazer
Posted By: rockfblaz
Subject: cva 1005 in automatic 95 4 door blazer
Date Posted: October 14, 2002 at 5:13 PM
If anyone is familiar with 95-97 blazers, please tell me the best way to install and cva 1005 in the dash so that it will not interfere with the shifter of the AT.
Replies:
Posted By: djfearny2
Date Posted: October 14, 2002 at 9:03 PM
if when it comes out i is close to the shifter than you may have to do either a custom job or program the tv to a active open status meaning you have to open manually after you move the shifter cause i am sure once your in like drive or so you have more than enough room.
-------------
Jon
Installer/Help Technician
---coral springs florida---
mecp certification is not always needed. I have it and it has not helped me out at all. my experience out shines it.
Posted By: rockfblaz
Date Posted: October 15, 2002 at 11:56 AM
I am going to have to do a custom job. If I tried to program it, the screen would be unviewable. The shifter is a problem in all positions when mounted in the regular cd player spot. It is very strange. Even in park the top-left portion of the monitor comes in contact with it and it goes back down. I believe I am going to have to relocate the controls. If anyone has any suggestions on the best way to go about this I would appreciate it.
|