cva 1003 (power)

Printed From: the12volt.com
Forum Name: Mobile Video, GPS, and Navigation
Forum Discription: Mobile Video Head Units, DVD Players, LCD and TFT Monitors, Navigation, GPS, PS2, PS3, XBox, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=4625
Printed Date: August 03, 2025 at 1:16 PM

Topic: cva 1003 (power)

Posted By: darkchild
Subject: cva 1003 (power)
Date Posted: October 19, 2002 at 11:54 AM

I just recently got the alpine unit and i am trying to test it for power. do i have to hook up anything more than just the red yellow and black. do the lines to the brakes have both be hooked up to just get power to the unit

Please help darkchild

Replies:

Posted By: Velocity Motors
Date Posted: October 19, 2002 at 9:57 PM

The constant, switched and ground have to be hooked up in order for this unit to work. No other connections need to test for start up and operation unless you want to test for video input, the you need the foot and hand brake connections hooked up as well.

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA

Posted By: darkchild
Date Posted: October 20, 2002 at 1:50 PM

I just recently replaced the ribbon band i replaced it myself could this be a problem. Is there any other things that could be causing the loss of power all the fuses are good i looked in the manuel and it said to push the reset what should i see when it comes on.

Print Page | Close Window