05 Pilot Alpine Nav-200 install
Printed From: the12volt.com
Forum Name: Mobile Video, GPS, and Navigation
Forum Discription: Mobile Video Head Units, DVD Players, LCD and TFT Monitors, Navigation, GPS, PS2, PS3, XBox, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=49028
Printed Date: June 15, 2024 at 3:56 PM
Topic: 05 Pilot Alpine Nav-200 install
Posted By: LarryB123
Subject: 05 Pilot Alpine Nav-200 install
Date Posted: January 31, 2005 at 11:36 AM
I have the new Alpine NAV-200 system installed, except for the VSS (vehicle speed sensor) connection. After getting some printouts from my local Honda dealer, I would need to to rip the dash out. Can I use a connection to the speed control? And where will it be located? Thanks for the help!
-------------
LarryB123
Replies:
Posted By: slammedb5
Date Posted: February 02, 2005 at 2:35 AM
Probe the cruise control harness.
-------------
EK Civic
security
no audio
Posted By: alpineguy678
Date Posted: February 02, 2005 at 11:29 AM
Alpine actually makes a part NVE-K300 that is a speed pulse generator. It is designed for older vehicles that do not have a VSS wire, but it will work on any vehicle and it Works very well.
Posted By: LarryB123
Date Posted: February 02, 2005 at 12:05 PM
Thanks for the info. I know my new Pilot has a vehicle speed sensor that will work. I know that the wire is coded blue/white. I'm just not sure where the speed control is under the hood, or what it looks like. Also, what should the voltage range be when I finally find it?
-------------
LarryB123
|