alpine cva-1005 bypass with switch?

Printed From: the12volt.com
Forum Name: Mobile Video, GPS, and Navigation
Forum Discription: Mobile Video Head Units, DVD Players, LCD and TFT Monitors, Navigation, GPS, PS2, PS3, XBox, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=5142
Printed Date: August 05, 2025 at 2:35 PM

Topic: alpine cva-1005 bypass with switch?

Posted By: ahui
Subject: alpine cva-1005 bypass with switch?
Date Posted: November 05, 2002 at 12:46 AM

cant get the bypass too work on alpine cva1005 in a 02 wrx. i've got two switches cause i cant find the foot brake lead wire... so ive connected the yellow and blue wire to power(foot brake lead) with a toggle switch in line. now my e brake is connected to and other toggle switch and in line with hand brake wire. now i've got the video to work while my e brake is on but when i take it off i lose video. is this because i've gotta connect the foot brake wire to the switch and in line with the ground wire? thnx

Replies:

Posted By: go2pac
Date Posted: November 05, 2002 at 10:53 AM

Use this module, this will do it automatically for you.

https://www.tune-town.com/Cars/stuff/pac/pac_tr.htm

-------------
Karl

Pacific Accessory Corporation
Mobile Audio Interfacing Equipment
Connecting You to Your Music Since 1976

Posted By: brand11
Date Posted: November 13, 2002 at 3:53 PM

on the e brake line try hooking up to ground wire instead of the e brake. so that is toggles on and off to the ground wire.

Brand11