KNA-DV4100 Not Synching
Printed From: the12volt.com
Forum Name: Mobile Video, GPS, and Navigation
Forum Discription: Mobile Video Head Units, DVD Players, LCD and TFT Monitors, Navigation, GPS, PS2, PS3, XBox, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=53412
Printed Date: July 24, 2025 at 9:28 PM
Topic: KNA-DV4100 Not Synching
Posted By: jeffclick
Subject: KNA-DV4100 Not Synching
Date Posted: April 06, 2005 at 5:20 PM
I've got a Kenwood DV4100 installed in a 2004 F-150, and it seems to be working with the exception of one thing: when in route, and the route is "hi-lited," the vehicle is shown on the road in the right spot, but the route hi-lite never dissappears from behind the vehicle indicator, and it seems that the navigation system doesn't "think" that the vehicle is en-route. No route guidance is given, either, due to this fact.
I've tried re-calibrating until I'm blue in the face, getting the vehicle icon point-blank on the road, etc., to no avail.
Any ideas?
Replies:
Posted By: r4nd0m_ax3
Date Posted: April 21, 2005 at 6:02 PM
Do you have the VSS hooked up? Mine behaved this way before I was finished hooking everything up.
Posted By: jeffclick
Date Posted: April 21, 2005 at 6:15 PM
Forgive me, VSS? Fill me in. (I paid to have this installed, and when I take it back, I want to be armed with good info...)
Thanks!
Posted By: thx2249
Date Posted: April 21, 2005 at 8:13 PM
I think VSS stands for Vehicle Speed Sensor. Not sure of the details of it, but I think it basically sends out an electronic pulse that is used to determine the speed of the car.
Posted By: Dsteinmann
Date Posted: April 22, 2005 at 12:30 AM
You have to hook up the VSS Wire for that to work
|