Print Page | Close Window

There is No AVIC-N2 Code!

Printed From: the12volt.com
Forum Name: Mobile Video, GPS, and Navigation
Forum Discription: Mobile Video Head Units, DVD Players, LCD and TFT Monitors, Navigation, GPS, PS2, PS3, XBox, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=54657
Printed Date: May 28, 2024 at 2:55 PM


Topic: There is No AVIC-N2 Code!

Posted By: Rollngthndr
Subject: There is No AVIC-N2 Code!
Date Posted: April 26, 2005 at 9:03 AM

Ok, so I have read most of the posts here that say you only have the code if your paycheck says Pioneer on it, and that is not true. MY PAYCHECK has Pioneer on it and I can tell you that there is no code. I did see the way to get around it on here though. Oh and there is one more way...but it has nothing to do with a stinkin code.



Replies:

Posted By: creeval
Date Posted: April 26, 2005 at 9:39 AM

I am sure most here understand that now due to NOTHING being available on the internet except the loop back to the camera in which pretty much is pointless if you have a destination mapped out for those that are going to go to that extent.  I think the most important thing that was left out is not being able to re-route NAV on the go.  Is this other way or anyway you know of able to do that?

-CV





Posted By: 12V_REP
Date Posted: April 26, 2005 at 10:59 AM
I agree that there is no code. And I said the Pioneer/paycheck thing. I also said "code", knowing that there is no true code. There is another way and I said that..and you just confirmed it too. My point was the only people that know how to bypass it work for Pioneer, and I am willing to bet only a handful there are privey to that info. I appreciate you dispelling the myth though. Maybe now people will realize that you are not going to get around it, hearing it from someone that works for the company. 

-------------




Posted By: Dick_gazinya
Date Posted: April 27, 2005 at 9:33 AM
creeval wrote:

I am sure most here understand that now due to NOTHING being available on the internet except the loop back to the camera in which pretty much is pointless if you have a destination mapped out


well...since my post was deleted??posted_image   I will say it again...why is it pointless???

The loop back to the camera does work, I have the n2 in my vehicle and am able to watch video while driving....



-------------




Posted By: creeval
Date Posted: April 27, 2005 at 9:42 AM
Its pointless because if you dont have a relay to make it think its in reverse and you have a destination input than it has your turns taking up part of the screen and when the turn comes it puts it over your video...If you do have the relay you can't control the video functions through the touch screen moving...Like I said my main concern was not being able to re-route myself without having to pull over on a highway.  I wish someone had a way to do this so my passanger can update destinations but so far I have yet to hear anything on this.




Posted By: Pcollier
Date Posted: April 27, 2005 at 4:14 PM
I thought someone had wrote that if you have the voice module then you will be able to change the navigation on the fly. Is this true?




Posted By: Ravendarat
Date Posted: April 27, 2005 at 8:55 PM
I was under the same impression when It came to the voice control. The way I understand it is that you can change on the fly using the voice control system.

-------------
double-secret reverse-osmosis speaker-cone-induced high-level interference distortion, Its a killer





Print Page | Close Window