Kenwood KNA-DV4100 VSS

Printed From: the12volt.com
Forum Name: Mobile Video, GPS, and Navigation
Forum Discription: Mobile Video Head Units, DVD Players, LCD and TFT Monitors, Navigation, GPS, PS2, PS3, XBox, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=55941
Printed Date: May 10, 2024 at 4:31 AM

Topic: Kenwood KNA-DV4100 VSS

Posted By: thx2249
Subject: Kenwood KNA-DV4100 VSS
Date Posted: May 17, 2005 at 9:47 PM

There is a white wire with a "protection diode" that is hooked up to the VSS wire and from there it is attached to the wiring harness of the navi unit. Unfortunately I lost that "protection diode" wire. Needless to say I'm wondering is there any other way to hook it up without me buying a new harness? It's about $60 for the whole thing, even though I would only need that separate wire. :(
Is the protection diode just a fuse?

Any help would be appreciated.

Replies:

Posted By: Ween
Date Posted: May 17, 2005 at 10:24 PM

just use a 1N4001 diode on the lead, non-banded end towards the navigation unit.

mark

Posted By: thx2249
Date Posted: May 18, 2005 at 9:15 PM

Thanks for the reply. Can anyone else confirm this?

Print Page | Close Window