Print Page | Close Window

Wiring a power inverter please help

Printed From: the12volt.com
Forum Name: Mobile Video, GPS, and Navigation
Forum Discription: Mobile Video Head Units, DVD Players, LCD and TFT Monitors, Navigation, GPS, PS2, PS3, XBox, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=5763
Printed Date: July 27, 2025 at 3:18 PM


Topic: Wiring a power inverter please help

Posted By: danny7554
Subject: Wiring a power inverter please help
Date Posted: November 22, 2002 at 9:35 AM

hello, all

I have 2 12's in my car and have a 250 watt amp running to them, i also have a 1200 watt amp running to my interior speakers, i have both of thoese amps power running off the some power cord, i was wondering if i could also hook the power inverter on this same power wire, it is only 8 cauge and i need to hook this power inverter up. please any ideas please wirte back



-------------
Danny



Replies:

Posted By: Velocity Motors
Date Posted: November 22, 2002 at 9:45 AM
I would not . Run a 4 gauge to a distribution block and then run your 8 gauge wires to the appropriate devices from the block. This is safer and will give your amps the needed power to perform properly under load.

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA




Posted By: Meitech916
Date Posted: November 26, 2002 at 1:46 AM

Yes thats one way to do it.

Or you can leave your sound system the way it is and run the power for the power inverter directly from your ignition harness (make sure you fuse it). Thats only depending on how big the power inverter is. Anything bigger than a 300watt rms power inverter should get power directly from the battery.



-------------
Mo-
Installer/MECP First Class





Print Page | Close Window