’97 ford explorer head rest

Printed From: the12volt.com
Forum Name: Mobile Video, GPS, and Navigation
Forum Discription: Mobile Video Head Units, DVD Players, LCD and TFT Monitors, Navigation, GPS, PS2, PS3, XBox, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=58303
Printed Date: May 03, 2024 at 12:54 AM

Topic: ’97 ford explorer head rest

Posted By: Kobaltic
Subject: ’97 ford explorer head rest
Date Posted: June 24, 2005 at 2:19 PM

I am looking into putting 5" monitors into the head rests on the 1997 ford explorer 4 door w/sunroof. There are 2 metal bars in the the seat. They run horizontal to each other and are about 3 to 4 inches apart. I could cut one out but i would think that ford put them in there for a good reason. Any thoughts. Thanks.

Replies:

Posted By: dxav
Date Posted: June 26, 2005 at 11:04 AM

Do you have a pic of the headrests? Most of the installs I do have bars which are vertical. I use zip ties to secure the monitor to the headrest, and it sits solid without compromising safety. How far from the rear cover are the bars? And what type of cushion material is used?

DXAV

Print Page | Close Window