Power sources for Mobile video electronic

Printed From: the12volt.com
Forum Name: Mobile Video, GPS, and Navigation
Forum Discription: Mobile Video Head Units, DVD Players, LCD and TFT Monitors, Navigation, GPS, PS2, PS3, XBox, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=59938
Printed Date: April 29, 2024 at 10:35 AM

Topic: Power sources for Mobile video electronic

Posted By: pdubl
Subject: Power sources for Mobile video electronic
Date Posted: July 23, 2005 at 9:23 PM

Can any one tell me or point me in the right direction for what wires in vehicles do I look for as a power sources for mobile electronics (i.e monitors, FM modulators

-------------
pdubl

Replies:

Posted By: Velocity Motors
Date Posted: July 24, 2005 at 12:17 AM

Go to the ignition harness and use a DMM to find the switch ignition or the constant wire. All vehicles are different, but all have ignition wires by the driver's dash.

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA

Posted By: dxav
Date Posted: July 26, 2005 at 6:05 PM

Check the current draw, too. You may want to separate power to the multimedia equipment with a voltage source from the battery, and then use a turn on (acc) line like VM suggested. I usually fuse the line from the battery, and run a separate line for the video.

DXAV

Print Page | Close Window