Print Page | Close Window

headrest and visor monitors

Printed From: the12volt.com
Forum Name: Mobile Video, GPS, and Navigation
Forum Discription: Mobile Video Head Units, DVD Players, LCD and TFT Monitors, Navigation, GPS, PS2, PS3, XBox, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=60513
Printed Date: July 06, 2025 at 2:30 AM


Topic: headrest and visor monitors

Posted By: loonytu
Subject: headrest and visor monitors
Date Posted: August 01, 2005 at 10:48 PM

wondering how to hookup two headrest monitors and one visor monitor together on one video output i am using a drop down monitor in the roof i already have the visor hooked up to the roof monitor. Can i use a y cable to hook up the two headrests together with the visor



Replies:

Posted By: dxav
Date Posted: August 02, 2005 at 9:30 PM
You can use an Y adapter. Try to get 75 Ohm video cable, too. Your best bet is to buy a $25 video amplifier (nothing fancy, they are all basically the same). Put the video output of the source into the input of the video amplifier, and then drive up to 4 displays cleanly. This should do the trick.

Good Luck!




Posted By: loonytu
Date Posted: August 02, 2005 at 10:51 PM

thxs for your help






Print Page | Close Window