Swap AVIC-N1 for a N2 or D1

Printed From: the12volt.com
Forum Name: Mobile Video, GPS, and Navigation
Forum Discription: Mobile Video Head Units, DVD Players, LCD and TFT Monitors, Navigation, GPS, PS2, PS3, XBox, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=62205
Printed Date: May 09, 2024 at 6:24 AM

Topic: Swap AVIC-N1 for a N2 or D1

Posted By: avking
Subject: Swap AVIC-N1 for a N2 or D1
Date Posted: September 04, 2005 at 11:01 PM

I want to swap my AVIC-N1 for either a N2 or D1. I had the N1 installed by a local install shop. I have the interfaces for Onstar and GM Chimes installed. I also had the XM installed. Does the N2 and/or D1 use the sames harness as the N1? Can I just pop the unit out and pop in the new one? If I have to change a couple wires around, I can do that. If it will require to re-wire everything because of a new harness, I am just going to skip it. Thanks.

Replies:

Posted By: whtcrxghst
Date Posted: September 06, 2005 at 1:16 PM

N2 uses the same wiring. You will have to access the hide-away box and switch that too though

Posted By: gt9450
Date Posted: October 23, 2005 at 1:12 PM

the d1 and the n2 wire hardness is not the same.

Posted By: xtremeaudio
Date Posted: October 25, 2005 at 4:00 AM

avic-1 and avic-n2 they are the same on wiring harness avic-d1 it not the same and don't play dvd you will need to add on dvd

Print Page | Close Window