Sunvisor Installation
Printed From: the12volt.comForum Name: Mobile Video, GPS, and Navigation
Forum Discription: Mobile Video Head Units, DVD Players, LCD and TFT Monitors, Navigation, GPS, PS2, PS3, XBox, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=62597
Printed Date: May 07, 2024 at 8:53 AM
Topic: Sunvisor Installation
Posted By: kosoku
Subject: Sunvisor Installation
Date Posted: September 12, 2005 at 8:01 PM
I have a Power Acoustic 7" monitor that I am installing in a Ford Ranger Sunvisor. The problem I've run into is the mounting depth is .7", and while the visor is about 1.25" thick, in order to mount flush I will have to cut through the center board.
My question is, a) what should I use to cut the board (it laughs at me when I try a razor blade) and b) will doing so make the entire visor flimsy, or will the monitor take the place of the board in supporting the overall shape of the visor?
For reference, here is where I am at now:
My question is, a) what should I use to cut the board (it laughs at me when I try a razor blade) and b) will doing so make the entire visor flimsy, or will the monitor take the place of the board in supporting the overall shape of the visor?
For reference, here is where I am at now:
Replies:
Posted By: bajaclawz71
Date Posted: September 12, 2005 at 11:45 PM