2006 Odyssey

I just got a new odyssey with DVD and Nav.  I wired up the nav unit to display dvd and aux input.  I figured I would share the schematics to anyone who was interested.  I just made a little project box w/ a circuit board and a few relays and wired it in.  I only had to cut one wire, the rest were just tapped into with simple little vampire connectors.  All went in in a matter of hours. 

In addition, I have a couple questions.  I put in an amp and subs and am having that horrible active noise cancellation problem.  It puts out about a 80hz signal, near full blast, when "eco" kicks in.  I read a post about disabling the ANC by cutting a wire...anyone know which one?  Have a diagram?  For this nav and TV install, I used my meter and such to figure out the wires, but I have no idea how to find this wire or even what I would be looking for.  I would also imagine there is a code to disable it on the head unit?  Any help appreciated. 

Lastly, I am using diversity antennaes (one set on each side) for the tv tuner, and they are great when not moving.  Most of the time, when moving, the picture breaks up and becomes choppy.  Is there a cure for this?  I would love to have a clear picture while driving to work.......

BT

diagram can be found at https://bennetttaylor.com/hondanav.JPG