Print Page | Close Window

static on camera

Printed From: the12volt.com
Forum Name: Mobile Video, GPS, and Navigation
Forum Discription: Mobile Video Head Units, DVD Players, LCD and TFT Monitors, Navigation, GPS, PS2, PS3, XBox, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=64359
Printed Date: July 07, 2025 at 10:55 PM


Topic: static on camera

Posted By: taser
Subject: static on camera
Date Posted: October 14, 2005 at 11:41 AM

Hey gang...new here and wish I knew about this site a loooooong time ago. It would have saved me a lot of headaches. I hope your camera is working fine.

Anyway, my friend had a bec104 installed in his car and is experiencing static on the picture. The camera is routed to the rear. I am suspecting that the camera may have been routed too close to some power lines or something. What other possibilities could there be? I do not know the type of picture the BEC104 produces and if it is normal. I hope the wire is not damaged. Should the cable be shielded? I hope not though. Most importantly, I hope the camera is not damaged.

Any help is apprecitated.




Replies:

Posted By: taser
Date Posted: October 14, 2005 at 11:44 AM

Sorry.....newbie mistake. I had meant to post this as a "REPLY" and not a new topic. I am trying to do this AND work at the same time.

Any way....any help is still appreciated.

NEWBIE......


Print Page | Close Window