Screen Recalibration
Printed From: the12volt.com
Forum Name: Mobile Video, GPS, and Navigation
Forum Discription: Mobile Video Head Units, DVD Players, LCD and TFT Monitors, Navigation, GPS, PS2, PS3, XBox, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=64778
Printed Date: May 14, 2024 at 11:01 PM
Topic: Screen Recalibration
Posted By: foltzy
Subject: Screen Recalibration
Date Posted: October 21, 2005 at 11:08 AM
hey folks,
i purchased the avic-n1 unit last october, and i have realized that the driver's side half of the screen is off about a half inch when you go to push a button via touchscreen (the right side of the screen is accurate). my question is..is there an option on the screen or some hardware i can buy to recalibrate the screen. ive never come across this issue in 4 years installing.
thanks in advance..
Replies:
Posted By: Dsteinmann
Date Posted: October 21, 2005 at 8:32 PM
I had that problem With my Old Kenwood KVT 910 I took it a part and reseated all the connectors. When i used the reset button it just worked until it was powered off. so i looked for a battery that would hold the settings but there was nothing like that so i reseated all conection and it went away for a lest 3 weeks then i sold it. and never heard anything
|