Print Page | Close Window

2005 armada nav video input ?

Printed From: the12volt.com
Forum Name: Mobile Video, GPS, and Navigation
Forum Discription: Mobile Video Head Units, DVD Players, LCD and TFT Monitors, Navigation, GPS, PS2, PS3, XBox, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=66464
Printed Date: May 05, 2024 at 7:20 PM


Topic: 2005 armada nav video input ?

Posted By: jasson327
Subject: 2005 armada nav video input ?
Date Posted: November 17, 2005 at 5:24 PM

Has anyone added video input to the factory nav system or is it possible.  Nissan Armada 2005



-------------
gotskidmarks



Replies:

Posted By: Asmodeus
Date Posted: November 21, 2005 at 11:11 AM

Have not done it in this specific vehicle....So I cannot offer more information than this...

Peripheral makes a unit to integrate video into the Nav of the Armada...

PAC also has the VCI-X which is supposed to work for the Armada as well....

I have not used these units before, I cannot say that they will work but this is what I found...



-------------
posted_image
Making the World A Louder Place




Posted By: ICKSTER40
Date Posted: November 25, 2005 at 10:11 PM
i've done several 05 qx56 , there the same nav, use the pac vci-x or navtv converter.




Posted By: nissandy
Date Posted: January 31, 2006 at 12:11 PM
Hi,

I recently tried to add a backup camera to my ’05 Nissan Pathfinder’s Nav unit to no success.
I used the Nav interface module from GNETCANADA. The manual specifically stated that I was supposed to connect the OEM Nissan harness to the Nav Unit where the DVD is inserted to. I checked that spot located under the passenger’s seat and did not find a matching molex RGB connector to the one supplied by Nissan. My installer and I decided to look behind the LCD screen and there we found two (2) molex connectors that matched the RGB molex connector on the wiring harness supplied by GNET/Nissan. We tried both connectors to no success. One of the connectors (not directly connected to the screen) that fitted did not seem to have the same amount of wires as the wiring harness had. The other connector found directly behind the LCD screen seemed like the correct one with same amount of wires. So I guess my question to you is, which one do you connect into? The one directly behind the screen, under the screen, or elsewhere I haven’t found yet? All other connections seem to be done correctly.

Thanks for your help!

Andy




Posted By: domtvandnav2go
Date Posted: February 02, 2006 at 6:48 PM

Hi

We have the interface for this car and many other. The Plug and Play unit plug in behind the LCD screen. Feel free to visit us at www.TVandNav2Go.com

Thanks Dominic 






Print Page | Close Window