2004 F150 15" flipdown install

Printed From: the12volt.com
Forum Name: Mobile Video, GPS, and Navigation
Forum Discription: Mobile Video Head Units, DVD Players, LCD and TFT Monitors, Navigation, GPS, PS2, PS3, XBox, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=66894
Printed Date: July 14, 2025 at 12:03 PM

Topic: 2004 F150 15" flipdown install

Posted By: mrhookupz
Subject: 2004 F150 15" flipdown install
Date Posted: November 23, 2005 at 4:33 PM

whats the best or correct way of doing it? i just throw 3\4 " plywood plus 90sec industrial glue and couple screws . any input will be much apreciated

-------------
.:CHICAGO:STUNZ:.

Replies:

Posted By: leedub
Date Posted: December 04, 2005 at 2:55 AM

it woiuld probably be best to screw the wood to one of the braces in the roof and then screw the tv up to the wood.

Posted By: ssnds
Date Posted: December 04, 2005 at 1:54 PM

i hope this truck is extended cab.?.?.!.?.

-------------
SSounds

Posted By: NowYaKnow
Date Posted: December 04, 2005 at 10:20 PM

If it has a sunroof and no rail system, I would recommend running an additional aluminum brace from side to side for support as the OEM braces are very weak. If it has no sunroof and the rail system, obviously there is plenty of support with the rails just cut it to fit. If it has no sunroof and no rail system, you should be ok with just incorporating the OEM roof braces.

Mike

Print Page | Close Window