visor monitor install

Printed From: the12volt.com
Forum Name: Mobile Video, GPS, and Navigation
Forum Discription: Mobile Video Head Units, DVD Players, LCD and TFT Monitors, Navigation, GPS, PS2, PS3, XBox, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=6732
Printed Date: July 27, 2025 at 2:45 AM

Topic: visor monitor install

Posted By: brad0843
Subject: visor monitor install
Date Posted: December 15, 2002 at 2:22 PM

hey, i am new to all this so i dont know that much. i want to put a monitor in each of my visors but the passenger visor has a miror in it so what do i do about that? any ideas would help. also what else do i need to get the tv's to work once i get them installed, im going to be running a playstation 2 so we can watch dvd's and play games. so could you let me know what else is needed. thanks

brad

Replies:

Posted By: timbo
Date Posted: December 19, 2002 at 3:30 PM

this might help you, first of all how thick is your visor it's self?. what kind of car is it?.

you'll need quality rca acble for the video feed to the ps/2 =, power cables for the monitor and

be careful which visor you buy, there's some jumk out there. hope his help's

-------------
tim

Posted By: 2G Sport
Date Posted: December 20, 2002 at 9:12 PM

https://www.partsexpress.com/pe/showdetl.cfm?&User_ID=10250643&St=5924&St2=60551312&St3=90617201&DS_ID=3&Product_ID=117888&DID=7

Not bad for $127. Only turns on when it detects a video signal. Even if you decide on a different model, there is an installation example at the bottom of the page. Good luck.

Posted By: RoundtheBend
Date Posted: December 27, 2002 at 1:35 AM

If that link doesn't work, try this one... https://www.partsexpress.com/pe/showdetl.cfm?&Product_ID=117888&DID=7

Print Page | Close Window