Anyone here know Kenwood Video products ?

Printed From: the12volt.com
Forum Name: Mobile Video, GPS, and Navigation
Forum Discription: Mobile Video Head Units, DVD Players, LCD and TFT Monitors, Navigation, GPS, PS2, PS3, XBox, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=69081
Printed Date: May 21, 2024 at 8:07 PM

Topic: Anyone here know Kenwood Video products ?

Posted By: hzemall
Subject: Anyone here know Kenwood Video products ?
Date Posted: December 23, 2005 at 11:12 PM

I am trying to sort all this out.

I have the 8017 double din.

C810 DVD Changer
710 Music Keg
iP500 ipod interface
KCA-S210A CD changer switcher.

Can I use them all together or do I have to get a second S210, will it even handle a second one ?

Thoughts ? Worst case I guess I can run the ipod off the AUX in on the iP500 but I don't want to.

-------------
Tim Baillie
Installer/Designer/Fabricator
Certified Autosound & Security

Replies:

Posted By: djfearny2
Date Posted: December 24, 2005 at 9:01 AM

ok the s210a will work for the ipod and the music keg but the c810 has a totally different plug on it. it has an 18 pin data plug instead of the 10-12 pin plug those other things use. that is the only device that may not work with your radio unless it has the plug on it i am not sure but the ipod and keg will work on the s210a
hope that helps a slight bit you may luck out and the tv has the conenction for the c810

-------------
Jon
Installer/Help Technician
---coral springs florida---
mecp certification is not always needed. I have it and it has not helped me out at all. my experience out shines it.

Posted By: gus1
Date Posted: December 27, 2005 at 4:30 PM

Should be able to daisychain the control protocol between boxes, then bring the video in on an Aux. for the DVD changer. You may also be able to use TV tuner plug for the DVD changer if it has the same plug on it (flat wide one)

If need be, I can give our local rep a call to definately clarify it..... you may have already figured it out.

Gus

-------------
Wherever I go, that is where I end up......