LED replacement in pioneer avic-n2

Printed From: the12volt.com
Forum Name: Mobile Video, GPS, and Navigation
Forum Discription: Mobile Video Head Units, DVD Players, LCD and TFT Monitors, Navigation, GPS, PS2, PS3, XBox, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=70282
Printed Date: May 04, 2024 at 3:17 AM

Topic: LED replacement in pioneer avic-n2

Posted By: bluebsh
Subject: LED replacement in pioneer avic-n2
Date Posted: January 07, 2006 at 5:35 PM

I have a pontica grand prix GT 2001 so of course the interiour lighting is red, which i like it like that, and have a pioneer AVIC-N2 nav system also but the problem is the buttons are blue, i would like them to be red to match the other buttons in my car... i took the face plate off the reciever and opened it up and saw it is a few SMD LED's which are clear blue ones... I want to replace them with red ones... anyone know what types I should be looking for or voltage or any information at all on changeing the LED's in this system? thanks!

Replies:

Posted By: Ballerinstaller
Date Posted: February 10, 2006 at 2:19 AM

I don't have any part numbers, but if you go to www.mouser.com and look up LED's I am sure you will find what you are looking for. I had a blown blue LED in mine, and I don't have the invoice anymore, but when I was looking around on their site, I saw they had every color in the rainbow in smt.

Hope this helps!

-------------
Pioneer Avic-N1
Clarion 300 watt 4 channel amp
PPI PC21400 1400 watt amp
2x JL 12 inch w7's
Polk EX series in factory locations
2000 Impala LS
Baller Installer - Pete D.

Posted By: bdl666
Date Posted: February 10, 2006 at 4:00 AM

Here you go.

https://www.ledtronics.com/datasheets/SMT.htm

Print Page | Close Window