Print Page | Close Window

PS2 flickering black and white?

Printed From: the12volt.com
Forum Name: Mobile Video, GPS, and Navigation
Forum Discription: Mobile Video Head Units, DVD Players, LCD and TFT Monitors, Navigation, GPS, PS2, PS3, XBox, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=70701
Printed Date: May 15, 2025 at 3:38 PM


Topic: PS2 flickering black and white?

Posted By: ademuzzy
Subject: PS2 flickering black and white?
Date Posted: January 13, 2006 at 6:35 PM

I have an alpine tme m790, and i have recently installed the PAC tr7 which works fine, however i am now trying to link my ps2 up to the monitor and it is flickering black and white on the screen and i dont know why that is ? any information would be greatly appreciated!!!

Many thanks



Replies:

Posted By: electrostatic
Date Posted: January 13, 2006 at 10:54 PM
bad signal cable? bent or broken contacts within connectors?




Posted By: infinkc
Date Posted: January 14, 2006 at 11:07 AM
monitor setup for the correct video signal?

-------------
There are 10 types of people in the world, ones that understand binary and ones that dont.




Posted By: ademuzzy
Date Posted: January 14, 2006 at 1:10 PM
The cable works in my TV in the house so i dont see why that would be it ?

And as the for the monitor i am not quite sure how u mean ?????




Posted By: ademuzzy
Date Posted: January 16, 2006 at 8:12 AM
any ideas guys???




Posted By: electrostatic
Date Posted: January 17, 2006 at 5:54 PM
apparently know one has encountered this yet, myself included. so all I can offer is general troubleshooting guidelines. Its now a matter of process of elimination.
try another monitor to verify that your ps2 works within your vehicle. If your ps2 works after this, suspect a bad monitor.




Posted By: electrostatic
Date Posted: January 17, 2006 at 6:14 PM
oh yeah, in response to "And as the for the monitor i am not quite sure how u mean ?????"
I'm not sure if your monitor features progressive scan or not, but make sure both your ps2 and monitor are configured for the same scan mode, progressive or interlaced. make sure you're selecting the appropriate aux input.




Posted By: ademuzzy
Date Posted: January 28, 2006 at 11:40 AM
i have tried different dvd players,  and ps2's and it's flickering still i bought it off ebay and i am wondering if its an NSTC monitor and not PAL but i would have thought there would be an option for it to be changed!!





Print Page | Close Window