AVH-p7500 sub

Printed From: the12volt.com
Forum Name: Mobile Video, GPS, and Navigation
Forum Discription: Mobile Video Head Units, DVD Players, LCD and TFT Monitors, Navigation, GPS, PS2, PS3, XBox, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=72215
Printed Date: May 09, 2025 at 6:42 PM

Topic: AVH-p7500 sub

Posted By: stylinz
Subject: AVH-p7500 sub
Date Posted: February 05, 2006 at 4:05 AM

So i got one of these off ebay and got it all hooked up. Pretty nice :) Anyway i'm hooking up a sub in my car and notice that there is only one RCA output for the sub. Out of all the radio's and amps i've messed with i've never seen one with just one sub output. i've seen it on some home stereo's where you do a powered sub but that's about it. So do i just plug one wire in to that plug and one into the amp. Do i get an adapter that will change one rca into two or what?

Thanks,

Christo

Replies:

Posted By: whtcrxghst
Date Posted: February 05, 2006 at 2:12 PM

It should have a red and a while RCA output for a sub. It comes out the little pigtail seperate from the other harness. Looks like this

https://parts.pioneerelectronics.com/part.asp?productNum=CDE7444

Posted By: stylinz
Date Posted: February 05, 2006 at 3:01 PM

yeah that's the pigtail. But it's two for front, two for rear, one for center, and one for sub

Posted By: sk8ingsmurf
Date Posted: February 05, 2006 at 3:14 PM

If it does in fact only have one ouptut for the sub just get a y-adapter, subs are going to be mono anyway so it really doesnt need a designated left and right channel.

Posted By: Ravendarat
Date Posted: February 05, 2006 at 3:51 PM

It has a built in surround sound processor so it should only have one sub output RCA. Just use a y cable to feed both inputs on the amp and your laughing.

-------------
double-secret reverse-osmosis speaker-cone-induced high-level interference distortion, Its a killer

Print Page | Close Window