Print Page | Close Window

lcd power

Printed From: the12volt.com
Forum Name: Mobile Video, GPS, and Navigation
Forum Discription: Mobile Video Head Units, DVD Players, LCD and TFT Monitors, Navigation, GPS, PS2, PS3, XBox, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=74677
Printed Date: April 28, 2024 at 6:05 PM


Topic: lcd power

Posted By: plyrh8r1
Subject: lcd power
Date Posted: March 18, 2006 at 11:04 AM

i was wondering if i can run my 2 lcd screens power cord to my fuse block for my amps



Replies:

Posted By: xscash
Date Posted: March 18, 2006 at 11:58 AM

sure just use the correct fuse for the lcd's

XS




Posted By: plyrh8r1
Date Posted: March 18, 2006 at 12:03 PM
do i need to use a relay



Posted By: 12tech
Date Posted: March 18, 2006 at 12:42 PM
depends on how u want them to operate. i would suggest using a fuse and a toggle switch.

-------------
kam



Posted By: xscash
Date Posted: March 18, 2006 at 3:20 PM

are you trying to connect the power or the ign? if power then just connect.....you will need a relay if you are trying to control them from the remote wire.

XS




Posted By: plyrh8r1
Date Posted: March 19, 2006 at 10:22 AM
just power i will use a toggle swicth thanks for da help


Print Page | Close Window