over head in black and white
Printed From: the12volt.com
Forum Name: Mobile Video, GPS, and Navigation
Forum Discription: Mobile Video Head Units, DVD Players, LCD and TFT Monitors, Navigation, GPS, PS2, PS3, XBox, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=75005
Printed Date: May 20, 2024 at 7:17 AM
Topic: over head in black and white
Posted By: roeroe
Subject: over head in black and white
Date Posted: March 23, 2006 at 10:02 PM
I have an 7.2 pyle overhead monitor,with an in dash tv and a seperate dvd player,here is the problem that has me puzzled.when the tv is in tuner both the in dash and the over head are in color, but when a dvd is put in the over head turns into black and white, but the in dash stays in color,I have tried everything and cannot figure it out.Any suggestions.
Replies:
Posted By: infinkc
Date Posted: March 24, 2006 at 12:11 AM
might be a loose video wire going to the overhead from the dvd player, or bad input, if its the same wire for the tuner and dvd and same inputs then im puzzled also.
-------------
There are 10 types of people in the world, ones that understand binary and ones that dont.
Posted By: roeroe
Date Posted: March 24, 2006 at 3:54 PM
It's the same wire going from the dvd player to the tuner to both the monitors,Like i said im puzzled with this one. The two monitors come in with color when the tuner is on and your wayching regular channels but when you put a dvd into the dvd player the in dash stays in color and the overhead is in black and white, cant figure it out.but thanks for the tips which i already did, If i figure it out i will post it.
Posted By: doibuy
Date Posted: March 24, 2006 at 8:09 PM
sounds like a defective unit, I haven't ever had good luck with a PYLE screen, any one I've ever installed, I ended up replacing it within 2 or 3 months.
|