N64 Power Supply

Printed From: the12volt.com
Forum Name: Mobile Video, GPS, and Navigation
Forum Discription: Mobile Video Head Units, DVD Players, LCD and TFT Monitors, Navigation, GPS, PS2, PS3, XBox, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=76255
Printed Date: May 04, 2024 at 4:54 AM

Topic: N64 Power Supply

Posted By: Ravendarat
Subject: N64 Power Supply
Date Posted: April 14, 2006 at 9:52 PM

I am needing to put an n64 in a vehicle and I want to hook it up without using the 120 plug if possible. Im reading the transformer and its confusing. It lists 120V 24w 60hz input, that makes sense, but for output it lists 3.3v 2.7a and then on the line below it says 12v .8a. So does this damn thing run on 12v or 3.3 volt or does it need both or what? Any insights?

-------------
double-secret reverse-osmosis speaker-cone-induced high-level interference distortion, Its a killer

Replies:

Posted By: firstrax
Date Posted: April 14, 2006 at 10:00 PM

Could be both. Most digital logic runs on 3.3. Drives and periphs on 12.

Posted By: Ravendarat
Date Posted: April 16, 2006 at 11:17 PM

Does any one have a definate answer to this, and btw firstrax, thank you for the reply. I was thinking along the same lines as you.

-------------
double-secret reverse-osmosis speaker-cone-induced high-level interference distortion, Its a killer

Print Page | Close Window