drawing power flipdown and two visors

Printed From: the12volt.com
Forum Name: Mobile Video, GPS, and Navigation
Forum Discription: Mobile Video Head Units, DVD Players, LCD and TFT Monitors, Navigation, GPS, PS2, PS3, XBox, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=77129
Printed Date: May 01, 2024 at 9:11 PM

Topic: drawing power flipdown and two visors

Posted By: thekrypt
Subject: drawing power flipdown and two visors
Date Posted: May 01, 2006 at 6:28 PM

In a 04 dakota quad where is the best place to draw power for a 17" LCD flipdown in the back and two 8" TFT sunvisor monitors

Thanks for your help

-------------
TheKrypt

Replies:

Posted By: kps67
Date Posted: May 03, 2006 at 10:24 AM

Get your +12V from your Accessory circuit in your Ignition Harness up under the dash. You can look under the Wiring Diagrams forum and find the right color wires that you need. And I would advise you to use a Video Amplifier to keep your source output signal at its strongest level.

-------------
Owner/Installer for Tricked Out Motor Works

Posted By: thekrypt
Date Posted: May 03, 2006 at 10:44 AM

Thanks for your info, i will try that. Thanx again

-------------
TheKrypt

Print Page | Close Window