Factory video output

Printed From: the12volt.com
Forum Name: Mobile Video, GPS, and Navigation
Forum Discription: Mobile Video Head Units, DVD Players, LCD and TFT Monitors, Navigation, GPS, PS2, PS3, XBox, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=79734
Printed Date: April 29, 2024 at 2:11 PM

Topic: Factory video output

Posted By: platinummaker
Subject: Factory video output
Date Posted: June 28, 2006 at 8:06 PM

Hi,

I am trying to get the video output routed from the factory oem Panasonic flip down on an '04 Cadillac Escalade to 2 headrest monitors in the middle seat. There are no RCA's for out put. Can I just splice into existing wires from the DVD player? Will that degrade picture quality to monitors? Any help greatly appreciated.

Thanks

Dave

-------------
DAVE

Replies:

Posted By: jaguarxj220
Date Posted: June 29, 2006 at 10:39 AM

ALL THE HELP I CAN GIVE YOU IS TO LOOK AROUND AT THIS FORUM MORE! IVE DONT IT BEFORE AND FROM WHAT I CAN REMEMBER ITS A BLUE OR LIGHT BLUE WIRE IN PIN 5 THAT IS GOING FROM THE DVD PLAYER TO THE SCREEN. YES YOU CAN SOLDER ON TO THE WIRE WITH LITTLE LOSS TO THE PICTURE QUALITY

Print Page | Close Window