AVIC N1 Touch Panel calibration
Printed From: the12volt.com
Forum Name: Mobile Video, GPS, and Navigation
Forum Discription: Mobile Video Head Units, DVD Players, LCD and TFT Monitors, Navigation, GPS, PS2, PS3, XBox, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=80857
Printed Date: May 16, 2024 at 10:14 PM
Topic: AVIC N1 Touch Panel calibration
Posted By: kaidoy
Subject: AVIC N1 Touch Panel calibration
Date Posted: July 27, 2006 at 6:27 PM
A couple months ago the allignment of my touch panel was off, and since then it has become worse. I was wondering if anyone knows how to calibrate the touch panel.
I've tried using the "Remocon touch panel test" in the secret service menu. However, I am not sure if I am using it properly.
Thanks in advance.
Jason
Replies:
Posted By: josh1979
Date Posted: July 27, 2006 at 7:56 PM
2 thing you can try is https://www.avic411.com and /or call 1800pioneer and ask for tech support ------------- bring back the rotary phone so i dont have to press 1 to proceed in english
Posted By: kaidoy
Date Posted: July 27, 2006 at 8:12 PM
Searched that message board already. Also, I called tech support earlier, and they told me it's a $200 minimum charge to service my head unit.
Posted By: themadjester
Date Posted: August 22, 2006 at 11:04 AM
You can calibrate it by going into the calibration sub menu. Go into "set up touch panel effective range. Once your in that menu, take a stylus from a PDA or something with a soft tip and trace the ENTIRE outer edge of the screen. This gives the system the parameters of your screen. when your done with that, use the back or "OK" button on your remote and it will kick you back to the calibration sub menu...go into set up calibration menu and do the set up. When you have touched the last test icon it will take you back out to the sub menu...your done. Turn it off and on and try it out.
-------------
The Hog
|