Print Page | Close Window

2006 Mazda MX-5 w/ Bose & Pioneer AVIC-Z1

Printed From: the12volt.com
Forum Name: Mobile Video, GPS, and Navigation
Forum Discription: Mobile Video Head Units, DVD Players, LCD and TFT Monitors, Navigation, GPS, PS2, PS3, XBox, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=81269
Printed Date: July 03, 2025 at 3:45 AM


Topic: 2006 Mazda MX-5 w/ Bose & Pioneer AVIC-Z1

Posted By: piomx5
Subject: 2006 Mazda MX-5 w/ Bose & Pioneer AVIC-Z1
Date Posted: August 06, 2006 at 12:22 PM

I am installing the Pioneer AVIC-Z1 in a 2006 Mazda MX-5 w/factory Bose.  This is a new body design. (& new Nav unit for that matter)  I have installed with a Metra dash kit, and Wiring Harness.  I have 2 issues I need assistance with:

1. Anyone have an offical wiring diagram for the new 2006 MX-5 (formerly called miata).  I am specificly looking for the VSS and eBrake Positive wires.  (I have seen indications that the Bose unit does not have a VSS wire in the harness, but does that mean there is none at all?)  What color is the eBrake positive line, and what voltage does it output to verify.

2. I have a white noise trailing the volume up and down "bong" tones, and any announcement the nav unit makes.  Radio sound is fine.  Any ideas?




Replies:

Posted By: extreme1
Date Posted: August 06, 2006 at 6:55 PM
VSS show's white at radio or cluster but says except bose, check the instrument cluster for the wire.

Park Brake is grey at the switch or instrument cluster

will show 12V with brake off and 0V when on.

-------------
Shaughn Murley
Install Manager, Dealer Services
Visions Electronics
Red Deer, Alberta


Print Page | Close Window