Print Page | Close Window

Overriding Brake on Clarion MAX675VD

Printed From: the12volt.com
Forum Name: Mobile Video, GPS, and Navigation
Forum Discription: Mobile Video Head Units, DVD Players, LCD and TFT Monitors, Navigation, GPS, PS2, PS3, XBox, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=84667
Printed Date: May 14, 2025 at 5:51 PM


Topic: Overriding Brake on Clarion MAX675VD

Posted By: simpley
Subject: Overriding Brake on Clarion MAX675VD
Date Posted: October 26, 2006 at 7:12 AM

Hello,

Just installed a Clarion MAX675VD and need some help with overriding the parking brake.  I tried grounding it but that does not do the trick.  Does anyone know if I put a toggle switch on that parking brake wire, and toggle it so that the current gets interrupted it will release the DVD player to work?  I do realize that this is a no, no but it is for my passangers especialy my fiance.  She is alread all over me becasue I don't know how to make the DVD work, once she finds out the cost of this sets up she will probably dump me...hehehe.....shhhh don't tell her I said that.

In any case any help will be very appriciated.  Thank you in advance for all the help. 



-------------
2006 Jetta
Clarion MAX675VD HU
Clarion APX4360 & DPX1800 AMP
Focal Polyglass all around
2.5 Farad CAP



Replies:

Posted By: DYohn
Date Posted: October 26, 2006 at 8:20 AM
Please read the forum rules.  Bypassing the parking brake safety interlock is illegal (and very unsafe) and this information is not allowed on this forum.

-------------
Support the12volt.com


Print Page | Close Window