AVIC-N2 diassembly

Printed From: the12volt.com
Forum Name: Mobile Video, GPS, and Navigation
Forum Discription: Mobile Video Head Units, DVD Players, LCD and TFT Monitors, Navigation, GPS, PS2, PS3, XBox, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=86029
Printed Date: April 28, 2024 at 11:40 PM

Topic: AVIC-N2 diassembly

Posted By: bulldawg3111
Subject: AVIC-N2 diassembly
Date Posted: November 22, 2006 at 2:38 PM

I was wondering if anyone had ever taken their n2 apart. If so, can you please give me some detailed instructions on how to get it apart. I don't want to pay $87 dollars for a service manual from pioneer and the torrent is taken forever. I have been trying to download it for a week and it only at 57%. So if someone could please provide me with detailed instructions on how to get the n2 apart.

Replies:

Posted By: master5
Date Posted: November 22, 2006 at 3:30 PM

I never had reason to disassemble an N2 but I do take head units apart often.

The procedure is always the same. Remove all the tiny phillips screws and store them in small plastic bags. Be careful and take your time. Also note which screws came out of where because they will occasionally be different lenghts or sizes for a particular need. Once the unit comes apart by gently prying the lid(s) you know you have got all the screws out. doesn't really get any simpler then that.

Hope I helped. Just keep in mind if the unit is under warranty there is a chance you may void it unless it can be reassembled with no clues it was taken apart by a non authorized repair center.

-------------

Posted By: i am an idiot
Date Posted: November 22, 2006 at 9:42 PM

What kind of problem are you having with the unit?

Posted By: master5
Date Posted: November 22, 2006 at 10:13 PM

He stated it is not downloading completly. That sounds to me more a software issue and I can't imagine being able to fix that if you can't even figure out how to remove the lid but...to each his own, maybe he'll get lucky.

or maybe he has privy to some technical info on that unit regarding this issue.

-------------

Posted By: flobee4
Date Posted: November 23, 2006 at 1:01 AM

top of this web site has the directions on how to take it apart, though I've never done it myself either.

https://www.eatmorepork.ca/modules.php?name=Forums&file=viewtopic&p=5

Frank

Posted By: tdvette
Date Posted: November 24, 2006 at 10:40 PM

It comes apart easy, with some time. It all comes apart in 3 sections. Very easy.

Posted By: fuzzynuts96813
Date Posted: November 25, 2006 at 11:04 PM

If you need any help installing the cable ribbon from the touchscreen to the motherboard, PM me. I just got done doing all of that, including breaking a microswitch. (not fun)

Posted By: free_refil
Date Posted: December 27, 2006 at 6:09 PM

Also, if you need to, check www.avic411.com for full instructions on how to disassemble this unit...

-------------
Pioneer AVIC-F700BT
Polk Audio MM6
Alpine MRD-M605
Alpine MRV-F450
Alpine SWR-1242D
RF 1 Farad Cap
Streetwires ZN Interconnects
KnuKoncepts Power Wire