n2 screen black out

Printed From: the12volt.com
Forum Name: Mobile Video, GPS, and Navigation
Forum Discription: Mobile Video Head Units, DVD Players, LCD and TFT Monitors, Navigation, GPS, PS2, PS3, XBox, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=86208
Printed Date: May 03, 2024 at 3:26 PM

Topic: n2 screen black out

Posted By: vietboy615
Subject: n2 screen black out
Date Posted: November 26, 2006 at 8:02 AM

I have n2 almost 1 yr old and i have black out on screen is have power everything and play dvd 2 but the only thing is screen not showing picture lets me know. maybe ribbon cable not sure?

Replies:

Posted By: cntrylvr79
Date Posted: November 26, 2006 at 8:10 AM

Yup sounds like that ever so great flex cable.

-------------
Cause I'm So white and nerdy...
First Class Certi-fried installer

Posted By: vietboy615
Date Posted: November 26, 2006 at 8:23 AM

where i can get flex cable at ? thank you quick response

Posted By: i am an idiot
Date Posted: November 26, 2006 at 8:23 AM

Before it blacked out completely did it have a picture till it got all the way open. If that is the case you do have a bad ribbon cable.

Posted By: vietboy615
Date Posted: November 26, 2006 at 8:27 AM

yes . so where i can get ribbon cable at? is easy to replace? let me know thank you alot

Posted By: i am an idiot
Date Posted: November 26, 2006 at 12:29 PM

Part number GXX1257

Phone number 1-800-421-5080 ext 152

Name of Place Pacific Coast Parts

Is it easy to change? depends

Posted By: vietboy615
Date Posted: November 26, 2006 at 4:10 PM

thank you i will order monday morning soon i got it i will try install and reply back here let you guys know .

Posted By: fuzzynuts96813
Date Posted: November 27, 2006 at 1:49 AM

Thanks again for your help with this topic on my unit Idiot.

Just a reminder to Vietboy. Use caution when removing the touchscreen from the outer case half. There is a tiny, tiny, tiny microswitch that senses when the screen has moved out of the unit fully. When you reinstall the touchscreen into the case half you must depress the switch before sliding it in, or you'll break it!!

Good Luck.

Posted By: free_refil
Date Posted: December 27, 2006 at 6:08 PM

Yea, the disassembly of this unit is NO JOKE!!! Go to www.avic411.com for full instructions...

-------------
Pioneer AVIC-F700BT
Polk Audio MM6
Alpine MRD-M605
Alpine MRV-F450
Alpine SWR-1242D
RF 1 Farad Cap
Streetwires ZN Interconnects
KnuKoncepts Power Wire