No audio on kenwood 717

Printed From: the12volt.com
Forum Name: Mobile Video, GPS, and Navigation
Forum Discription: Mobile Video Head Units, DVD Players, LCD and TFT Monitors, Navigation, GPS, PS2, PS3, XBox, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=86279
Printed Date: May 13, 2025 at 3:51 PM

Topic: No audio on kenwood 717

Posted By: 57765445455
Subject: No audio on kenwood 717
Date Posted: November 27, 2006 at 2:46 PM

I have recently installed a kenwood kvt 717 in my 2003 jeep grand cherrokee and there is no audio when i play a CD/DVD, however there is sound when i use the tuner to play the radio. I sent the monitor back once and they told me there was nothing wrong with it. When playing a CD/DVD it will play base through my subs but no sound. Any suggestions?

-------------
HI

Replies:

Posted By: mike_2127
Date Posted: November 27, 2006 at 9:03 PM

do you have a factory amp? i think you powered the amp with the power antenna wire(blue) from the radio and not the remote wire(blue/white). the factory amp is only turning on when you have the tuner cause thats the only time the remote antennas go up. you need to have it powered up all the time.

Posted By: mike_2127
Date Posted: November 27, 2006 at 9:04 PM

use the blue/white wire on the harness

Posted By: 57765445455
Date Posted: November 28, 2006 at 3:10 PM

That was it thank you for your help

-------------
HI

Posted By: mike_2127
Date Posted: December 01, 2006 at 12:52 PM

you're welcome

Print Page | Close Window