overhead video in a 02 ford f250 crew cab

Printed From: the12volt.com
Forum Name: Mobile Video, GPS, and Navigation
Forum Discription: Mobile Video Head Units, DVD Players, LCD and TFT Monitors, Navigation, GPS, PS2, PS3, XBox, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=91107
Printed Date: May 09, 2025 at 1:00 PM

Topic: overhead video in a 02 ford f250 crew cab

Posted By: douce
Subject: overhead video in a 02 ford f250 crew cab
Date Posted: February 28, 2007 at 9:40 AM

I am looking at installing an overhead dvd around 10" (haven't purchased yet) in my 2002 Ford F-250 crew cab. I want to install it on the flat spot right behind the dome light. Does anyone have any mounting / installation tips on this truck ? Thanks, Jim

Replies:

Posted By: douce
Date Posted: March 02, 2007 at 7:35 PM

Bump......

Posted By: securinu
Date Posted: March 06, 2007 at 12:24 AM

10" wont fit . 8.5 will but you will need to make a support.

-------------
Joe O'Byrne
Owner / Installer

Posted By: douce
Date Posted: March 07, 2007 at 4:56 PM

ok, thanks for the info Joe. Have been leaning toward the Myron & Davis ADM-107 . The dimensions show it would fit (barely) on the flat spot behind the dome light. I need to go by the local shop that sells them and hold it up there and see. Jim

Posted By: douce
Date Posted: March 07, 2007 at 5:00 PM

Hey Joe, I just went to your site and saw you carry that brand. I heard they are good ones. Jim

Posted By: douce
Date Posted: March 09, 2007 at 12:26 PM

Well I ordered and received a Myron&Davis ADM107 . Seems like a nice unit. Will be installing it Saturday morning. The only thing I was upset about was the print on the outside of the box where it shows the features etc. They drew a line through the a/v output feature. Now i wish I would of ordered an ADM102 which really has a/v output. I wonder why they did that? Most of the advertisements say a/v output . I even opened and read the owners manual and it shows a/v output. I wanted to run direct to head unit and not have to use the modulated signal. oh well. Jim