pioneer avic n2 gps antenna part number

Printed From: the12volt.com
Forum Name: Mobile Video, GPS, and Navigation
Forum Discription: Mobile Video Head Units, DVD Players, LCD and TFT Monitors, Navigation, GPS, PS2, PS3, XBox, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=91621
Printed Date: June 28, 2025 at 10:10 PM

Topic: pioneer avic n2 gps antenna part number

Posted By: jankowski
Subject: pioneer avic n2 gps antenna part number
Date Posted: March 12, 2007 at 11:00 PM

Does anyone out there know what the impedence of the avic-n2 GPS antenna is? I am not sure if it is 50 Ohm or 75 Ohm. I need to find a replacement connector for this antenna. I have lokked on Digikey, and there are several Fakra SMB connectors, but I am not sure which one is right for the gps unit with the grey connector. I know you should never cut the antenna wire and solder a new one, but this is kind of a science project for me, so any help in a specific part number replacement would help.

Thanks,

Joe

-------------
Joseph Jankowski, S.M.

Replies:

Posted By: i am an idiot
Date Posted: March 13, 2007 at 6:32 AM

CXC4864 is the part number for the entire antenna assembly

1-800-421-5080 is the phone number for Pacific coast Parts the distributor you need to call to get it.

Posted By: jankowski
Date Posted: March 15, 2007 at 10:51 AM

Thank you for the reply, although that is great information for a replacement part, I actually need to know the individual part number for the Fakra connector on the end of the antenna. There are several at this link, https://www.amphenolrf.com/products/fakrasmb.asp but I am not sure what one matches the Pioneer connector, as I mentioned I need both the male and female, and I also need to know if the antenna is 50Ohm or 75 Ohm impedence.

Thanks,

joe

-------------
Joseph Jankowski, S.M.