eclipse avn5495 ipod integration

Printed From: the12volt.com
Forum Name: Mobile Video, GPS, and Navigation
Forum Discription: Mobile Video Head Units, DVD Players, LCD and TFT Monitors, Navigation, GPS, PS2, PS3, XBox, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=92882
Printed Date: May 08, 2024 at 6:56 AM

Topic: eclipse avn5495 ipod integration

Posted By: smarterchild12
Subject: eclipse avn5495 ipod integration
Date Posted: April 12, 2007 at 7:33 PM

hey guys. i recently purchased an avn5495 and wanted some sort of ipod integration kit. im looking at the one made by eclipse and am frankly not thrilled. is tehre anyway i can purchase a kit that will allow video from a video ipod to be transmitted onto the nav screen? that is the type of kit i would prefer and the eclipse one doesnt have the video funciton. thanks in advance.

Replies:

Posted By: Velocity Motors
Date Posted: April 12, 2007 at 11:23 PM

There is a universal type iPod bypass but it doesn't allow for charging or for display. It's a PAC Part Number: IC-AV module.This will allow for audio RCA output and video out put as well. The deck has to have a audio input jack for RCA's and use the Eclipse backup camera input for video.

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA

Posted By: smarterchild12
Date Posted: April 13, 2007 at 10:54 AM

hey thanks for the quick reply. much appreciated. i just have a few more quesitons. so when i hook an ipod up with this cable, any song info will not appear on the display as with other adapters? Also, do I need any other equipment to hook this to the eclipse? and where can i buy it.

Thanks again.

Posted By: smarterchild12
Date Posted: April 13, 2007 at 10:56 AM

btw, are you talking about this

https://www.installer.com/item/display_item.php?it=pxp01

Posted By: smarterchild12
Date Posted: April 13, 2007 at 11:56 AM

i just wanted to let you know that i took apart my unit and saw in the back a 6 pin jack. i looked this up in the owners manual and said that this is used to connect to external video equipment, such as a VTR. its not the video output (which is separate). on one end is the 6 pin connector and on the other are three cables, which I think are RCA cables. can i use these three cables and connect them to the item in the link i posted above to get the video from the ipod? thanks again and sorry for all tehse posts.

btw, where can i get this 6 pin connecting cable. it says it included, but the dealer i had it installed at didnt include it and its not in the box.