hardwiring monitors, 2004 yukon xl

Printed From: the12volt.com
Forum Name: Mobile Video, GPS, and Navigation
Forum Discription: Mobile Video Head Units, DVD Players, LCD and TFT Monitors, Navigation, GPS, PS2, PS3, XBox, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=93349
Printed Date: June 28, 2025 at 4:18 AM

Topic: hardwiring monitors, 2004 yukon xl

Posted By: osteo16
Subject: hardwiring monitors, 2004 yukon xl
Date Posted: April 25, 2007 at 8:02 PM

Hola From A NOOB:

Vehicle: 2004 yukon xl

Monitors: 7" lcd w/dvd

question. looking to hardwire these units. they have fused connectors with 12v and ground wires. the center console has a 12v constant ,I believe, power point lighter outlet. Can I wire both these units into that source, will there be enough power? Also I was going to probly install two switches in the center console for on /off use by the driver. sound good? will it all work?

Thanks for your time and consideration.

Replies:

Posted By: pitoaudiovisual
Date Posted: May 02, 2007 at 7:08 PM

it should work just check the voltage and make sure it has enought voltage for the monitors. as long as the car is on it shouldn't be a problem

-------------
Confidence is the key to any project!!

Posted By: still_walkin
Date Posted: May 22, 2007 at 8:43 PM

Yeah it wil work but if you wire it to you cig lighter it will stay on unless you uplug it or use the swtich if you tap into your fusebox and hard wire it to a curcit that requires the car to be in acessory mode you can control ur tvs by the igintion which means when the car is off so are ur tvs no switches to flick

-------------
1993 sdv
Alpine 4x6 6x9 5 1/4 swr-10d4
alpine v60
12.5 VGA flip down
Nettop pc w/10" touch screen
78nova
5-re audio 5x7 ,10" sub &
Xtx-500.5
"Take the faceplate off get the jumperpack"

Print Page | Close Window