Connecting Aux Monitor to CVA-1005

Printed From: the12volt.com
Forum Name: Mobile Video, GPS, and Navigation
Forum Discription: Mobile Video Head Units, DVD Players, LCD and TFT Monitors, Navigation, GPS, PS2, PS3, XBox, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=9376
Printed Date: August 21, 2025 at 9:14 AM

Topic: Connecting Aux Monitor to CVA-1005

Posted By: tmack
Subject: Connecting Aux Monitor to CVA-1005
Date Posted: February 11, 2003 at 1:21 PM

Is there a special way to connect an Alpine TME-M750 to a CVA-1005? Do I just connect the power harness wires from the monitor brain, to the same ones on the CVA-1005 brain? Then just connect the rca's? Whatever insight would be helpful.

Thanks

Replies:

Posted By: auex
Date Posted: February 11, 2003 at 3:43 PM

There really is nothing special to connect another monitor to a cva. All you should have to do is wire the power up, however you want it probably swiched of some sort, and ground it. Then connect the video output from the cva's control box to the input of the monitor.

-------------
Certified Security Specialist
Always check info with a digital multimeter.
I promise to be good.
Tell Darwin I sent you.

I've been sick lately, sorry I won't be on much.

Posted By: Velocity Motors
Date Posted: February 11, 2003 at 5:16 PM

If you hook up the TME to the CVA you will only be able to play what is in the video source of the CVA on the TME. If you want it to play a different source on both, you will need a switch box.

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA

Print Page | Close Window