pioneer avic n3hooking up a ps2

Printed From: the12volt.com
Forum Name: Mobile Video, GPS, and Navigation
Forum Discription: Mobile Video Head Units, DVD Players, LCD and TFT Monitors, Navigation, GPS, PS2, PS3, XBox, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=93824
Printed Date: June 28, 2025 at 9:48 AM

Topic: pioneer avic n3hooking up a ps2

Posted By: dcman41
Subject: pioneer avic n3hooking up a ps2
Date Posted: May 11, 2007 at 9:51 PM

I just have a quick question, I have the pioneer n3 instaleld and working properly... But im wondering how the ps3 should be connected to the n3 brain. It should go to input correct ? Also i have 4 other tvs that need to be working all while the ps2 is on. So basically I need 5 tvs (including the n3 screen) to display what ever is on the ps2. I believe i would run a wire from output on the n3 brainup to a video amplifier, and split up the signals correct ?

Replies:

Posted By: dcman41
Date Posted: May 11, 2007 at 10:03 PM

Also another question i have is the Vehicle speed sensor(VSS) (The pink wire) obtained by tapping into the tach wire?

Posted By: dcman41
Date Posted: May 11, 2007 at 11:16 PM

One last thing this is all in a 2000 Bmw 325ci. So if you know the location and color of the VSS, please post it tia.

Posted By: DYohn
Date Posted: May 12, 2007 at 12:25 AM

How can you "have it installed and working properly" but not have the VSS wire connected? Also your "5 screen" installation sounds to me like you'll need a distribution amplifier.

-------------
Support the12volt.com

Print Page | Close Window