dealer vcp, 2003 town and country
Printed From: the12volt.com
Forum Name: Mobile Video, GPS, and Navigation
Forum Discription: Mobile Video Head Units, DVD Players, LCD and TFT Monitors, Navigation, GPS, PS2, PS3, XBox, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=94377
Printed Date: May 14, 2025 at 1:30 AM
Topic: dealer vcp, 2003 town and country
Posted By: fletchm1fc
Subject: dealer vcp, 2003 town and country
Date Posted: May 30, 2007 at 12:00 PM
Hello, newbie here. I have a 2003 Town&Country with a dealer installed vcp and monitor. The vcp is between the front seats in a ditty box that matches the Chrysler ditty box, and the monitor is mounted between the overhead console and rear seat controls. The vcp is made by Visteon, pn VP1U3F-18C907-AA. I am looking for the wire diagram from the vcp to monitor. I want to get rid of vcp and put in a dvd player and use the monitor that's there. Any help would be greatly appreciated. ------------- Fletch
Replies:
Posted By: Mike M2
Date Posted: May 30, 2007 at 9:08 PM
Just tap into the auxilary RCA input jacks, much easier...
-------------
Mike M2
Tech Manager
CS Dealer Services
Posted By: fletchm1fc
Date Posted: May 31, 2007 at 9:03 AM
Thank you Mike, you're right that would be alot easier, but I want to get rid of the vcp and the ditty box and with all the wires that come and go from the vcp and the monitor, I really want to make sure I'm hooking to the right wires. Besides, if I wreak the monitor and need to replace it, my wife might give me that look that only a wife can give.
-------------
Fletch
|